Q. Serial Recommendations Index
Signal receivers for manual working
Signal receivers for automatic and semi-automatic working, used for manual working
Automatic switching functions for use in national networks
Advantages of semi-automatic service in the international telephone service
Advantages of international automatic working
Signalling systems to be used for international automatic and semi-automatic telephone working
Signalling systems to be used for international manual and automatic working on analogue leased circuits
Vocabulary of switching and signalling terms
[Withdrawn] Definitions relating to national and international numbering plans Deleted Q.10 was an extract of ITU-T E.160. E.160 was later replaced by ITU-T E.164
[Withdrawn] Numbering plan for the ISDN era Q.11 bis was an alias name of ITU-T E.164. Only this alias name was suppressed. ITU-T E.164 remains valid
[Withdrawn] Timetable for coordinated implementation of the full capability of the numbering plan for the ISDN era (Recommendation E.164) Q.11 ter was an alias name of ITU-T E.165. Only this alias name was suppressed. ITU-T E.165 remains valid
Overflow - alternative routing - rerouting - automatic repeat attempt
[Withdrawn] International telephone routing plan Q.13 was an alias name of ITU-T E.171. Only this alias name was suppressed. ITU-T E.171 remains valid
Means to control the number of satellite links in an international telephone connection
[Withdrawn] Nominal mean power during the busy hour Deleted Q.15 was an extract of ITU-T G.223. ITU-T G.223 remains valid
[Withdrawn] Maximum permissible value for the absolute power level of a signalling pulse Q.16 was an alias name of ITU-T G.224. Only this alias name was suppressed. ITU-T G.224 remains valid
Comparative advantages of "in-band" and "out-band" systems
Systems recommended for out-band signalling
Frequencies to be used for in-band signalling
Technical features of push-button telephone sets
Multifrequency push-button signal reception
Splitting arrangements and signal recognition times in "in-band" signalling systems
Direct access to the international network from the national network
Transmission of the answer signal
Determination of the moment of the called subscriber's answer in the automatic service
Causes of noise and ways of reducing noise in telephone exchanges
Improving the reliability of contacts in speech circuits
Noise in a national 4-wire automatic exchange
Reduction of the risk of instability by switching means
Protection against the effects of faulty transmission on groups of circuits
Technical characteristics of tones for the telephone service This Recommendation is published with the double number E.180 and Q.35. For more details see E.180.
[Withdrawn] Customer recognition of foreign tones Q.36 was an alias name of ITU-T E.181. Only this alias name was suppressed. ITU-T E.181 remains valid
[Withdrawn] The transmission plan Deleted Q.40 was an extract of ITU-T G.101. ITU-T G.101 remains valid
[Withdrawn] Mean one-way propagation time Deleted Q.41 was an extract of ITU-T G.114. ITU-T G.114 remains valid
[Withdrawn] Stability and echo (echo suppressors) Q.42 was an alias name of ITU-T G.131. Only this alias name was suppressed. ITU-T G.131 remains valid
[Withdrawn] Transmission losses, relative levels Deleted Q.43 was an extract of ITU-T G.101. ITU-T G.101 remains valid
Attenuation distortion
Transmission characteristics of an analogue international exchange
Transmission characteristics of an analogue international exchange
Demand assignment signalling systems
[Withdrawn] CCITT automatic transmission measuring and signalling testing equipment ATME No. 2 Q.49 was an alias name of ITU-T O.22. Only this alias name was suppressed. ITU-T O.22 remains valid
Signalling between Circuit Multiplication Equipment (CME) and International Switching Centres (ISC)
Signalling between International Switching Centres (ISC) and Digital Circuit Multiplication Equipment (DCME) including the control of compression/decompression
Signalling between International Switching Centres (ISC) and Digital Circuit Multiplication Equipment (DCME) including the control of compression/decompression over an IP network
Signalling between international switching centres and stand-alone echo control devices
Signalling between signal processing network equipment (SPNE) and international switching centres (ISC)
Signalling between signal processing network equipment (SPNE) and international switching centres (ISC) over an IP network
The unified functional methodology for the characterization of services and network capabilities including alternative object oriented techniques
Overview of methodology for developing management services
ISDN circuit mode switched bearer services
Stage 2 description for packet mode services
Service procedures for Universal Personal Telecommunication - Functional modelling and information flows
Introduction to stage 2 service descriptions for supplementary services
Direct dialling-in
Stage 2 description for number identification supplementary services : Multiple subscriber number Published with ITU-T Q.81.8.
Stage 2 description for number identification supplementary services : Calling line identification presentation (CLIP) and calling line identification restriction (CLIR) Published with ITU-T Q.81.5.
[Withdrawn] Stage 2 description for number identification supplementary services: Calling line identification restriction (CLIR)
Stage 2 description for number identification supplementary services : Connected line identification, presentation and restriction (COLP) and (COLR) Published with ITU-T Q.81.3.
[Withdrawn] Stage 2 description for number identification supplementary services: Connected line identification restriction (COLR)
Stage 2 description for number identification supplementary services : Malicious call identification (MCID) This subject was only recognised and is for further study
Stage 2 description for number identification supplementary services : Sub-addressing (SUB) Published with ITU-T Q.81.2.
Stage 2 description for call offering supplementary services : Call transfer Empty Recommendation. This subject was only recognised and is for further study.
Stage 2 description for call offering supplementary services : Call forwarding Published with ITU-T Q.82.3.
Stage 2 description for call offering supplementary services : Call deflection Published with ITU-T Q.82.2.
Line hunting
Explicit call transfer
Stage 2 description for call completion supplementary services : Call waiting (CW) Published with ITU-T Q.83.4.
Call hold
Stage 2 description for call completion supplementary services : Completion of call to busy subscriber Empty Recommendation. This service has only been identified and requires further study.
Stage 2 description for call completion supplementary services : Terminal portability Published with ITU-T Q.83.1.
Conference calling (CONF)
Three-party service
Stage 2 description for community of interest supplementary services : Closed user group Published with ITU-T Q.85.3.
Stage 2 description for community of interest supplementary services : Multi-level precedence and preemption (MLPP) Published with ITU-T Q.85.1.
Global Virtual Network Service (GVNS)
Stage 2 description for charging supplementary services : Credit card call Empty Recommendation. This service has only been identified and requires further study.
Advice of charge (AOC)
Reverse charging (REV)
International Freephone Service (IFS)
International Telecommunication Charge Card (ITCC)
User-to-user signalling (UUS)
Stage 2 description for additional information transfer supplementary services : User signalling bearer services Empty Recommendation. This service has only been identified and requires further study.
Facilities provided in international semi-automatic working
Facilities provided in international automatic working
Numbering used
Language digit or discriminating digit
National (significant) number
The sending-finished signal
Standard sending sequence of forward address information
Analysis of forward address information for routing
One-way or both-way operation of international circuits
Transmission of the answer signal in international exchanges
General aspects of the utilization of standardized CCITT signalling systems on PCM links
Signal levels and signal receiver sensitivity
Connection of signal receivers in the circuit
Typical transmission requirements for signal senders and receivers
Logic for the control of echo control devices Renumbered as Q.115.1 when revised in 2002
Protocols for the control of signal processing network elements and functions
Logic for the control of echo control devices and functions Formerly Rec. Q.115
Logic for the control of Voice Enhancement Devices/Functions
Indication given to the outgoing operator or calling subscriber in case of an abnormal condition
Alarms for technical staff and arrangements in case of faults
Abnormal conditions - Special release arrangements
Indication of congestion conditions at transit exchanges
Specifications of Signalling System No. 4
Specifications of Signalling System No. 5
Specifications of Signalling System No. 6
Specifications of Signalling System R1
Specifications of Signalling System R2
Digital local, combined, transit and international exchanges - Introduction and field of application
Exchange interfaces towards other exchanges
Digital exchange interfaces for subscriber access
Digital exchange interfaces for operations, administration and maintenance
Digital exchange functions
Digital exchange connections, signalling and ancillary functions
Digital exchange design objectives - General
Digital exchange design objectives - Operations and maintenance
Digital exchange performance design objectives
Digital exchange measurements
Transmission characteristics of digital exchanges
Transmission characteristics at 2-wire analogue interfaces of digital exchanges
Transmission characteristics at 4-wire analogue interfaces of digital exchanges
Transmission characteristics at digital interfaces of digital exchanges
Lists and meanings of FITEs, BITEs and SPITEs - Representation of information contents of signals of the signalling systems
Interworking of signalling systems - Introduction
Events
Interworking of signalling systems - Information analysis tables
Drawing conventions
Logic procedures
Interworking requirements for new signalling systems
Miscellaneous interworking aspects
Logic procedures for incoming signalling system No. 4
Logic procedures for incoming signalling system No. 5
Logic procedures for incoming signalling system No. 6
Logic procedures for incoming Signalling System No. 7 (TUP)
Logic procedures for incoming signalling system R1
Logic procedures for incoming signalling system R2
Logic procedures for incoming signalling system No. 7 (ISUP)
Logic procedures for outgoing signalling system No. 4
Logic procedures for outgoing signalling system No. 5
Logic procedures for outgoing signalling system No. 6
Logic procedures for outgoing Signalling System No. 7 (TUP)
Logic procedures for outgoing signalling system R1
Logic procedures for outgoing signalling system R2
Logic procedures for outgoing Signalling System No. 7 (ISUP)
Logic procedures for interworking of signalling system No. 4 to R2
Logic procedures for interworking of signalling system No. 5 to No. 6
Logic procedures for interworking of signalling system No. 5 to No. 7 (TUP)
Logic procedures for interworking of signalling system No. 5 to R1
Logic procedures for interworking of signalling system No. 5 to R2
Logic procedures for interworking of Signalling System No. 5 to Signalling System No. 7 (ISUP)
Logic procedures for interworking of signalling system No. 6 to No. 5
Logic procedures for interworking of signalling system No. 6 to No. 7 (TUP)
Logic procedures for interworking of signalling system No. 6 to R1
Logic procedures for interworking of signalling system No. 6 to R2
Logic procedures for interworking of Signalling System No. 6 to Signalling System No. 7 (ISUP)
Logic procedures for interworking of signalling system No. 7 (TUP) to No. 5
Logic procedures for interworking of signalling system No. 7 (TUP) to No. 6
Logic procedures for interworking of signalling system No. 7 (TUP) to No. 7 (TUP)
Logic procedures for interworking of signalling system No. 7 (TUP) to R1
Logic procedures for interworking of signalling system No. 7 (TUP) to R2
Logic procedures for interworking of Signalling System No. 7 (TUP) to Signalling System No. 7 (ISUP)
Logic procedures for interworking of signalling system R1 to No. 5
Logic procedures for interworking of signalling system R1 to No. 6
Logic procedures for interworking of signalling system R1 to No. 7 (TUP)
Logic procedures for interworking of signalling system R1 to R2
Logic procedures for interworking of Signalling System R1 to Signalling System No. 7 (ISUP)
Logic procedures for interworking of signalling system R2 to No. 4
Logic procedures for interworking of signalling system R2 to No. 5
Logic procedures for interworking of signalling system R2 to No. 6
Logic procedures for interworking of signalling system R2 to No. 7 (TUP)
Logic procedures for interworking of signalling system R2 to R1
Logic procedures for interworking of Signalling System R2 to Signalling System No. 7 (ISUP)
Logic procedures for interworking of Signalling System No. 7 (ISUP) to No. 5
Logic procedures for interworking of Signalling System No. 7 (ISUP) to No. 6
Logic procedures for interworking of Signalling System No. 7 (ISUP) to No. 7 (TUP)
Logic procedures for interworking of signalling system No. 7 (ISUP) to R1
Logic procedures for interworking of Signalling System No. 7 (ISUP) to R2
Interworking between the Signalling System No. 7 ISDN User Part (ISUP) and Signalling Systems No. 5, R2 and Signalling System No. 7 TUP
Interworking of Signalling System No. 7 ISUP, TUP and Signalling System No. 6 using arrow diagrams
Interworking between ISDN access and non-ISDN access over ISDN User Part of Signalling System No. 7
Interworking between ISDN access and non-ISDN access over ISDN user part of Signalling System No. 7: Support of VPN applications with PSS1 information flows
Introduction to CCITT Signalling System No. 7
Functional description of the message transfer part (MTP) of Signalling System No. 7
Signalling data link
Signalling link
Signalling network functions and messages Covering note, 17.09.99: Erratum (english only)
Signalling network structure
Message transfer part signalling performance
Testing and maintenance
Assignment procedures for international signalling point codes
Hypothetical signalling reference connection
Simplified MTP version for small systems
Functional description of the signalling connection control part
Definition and function of signalling connection control part messages
Signalling connection control part formats and codes
Signalling connection control part procedures
Signalling connection control part user guide
Signalling System No. 7 - Signalling connection control part (SCCP) performance
Functional description of the Signalling System No. 7 Telephone User Part (TUP)
General function of telephone messages and signals
Telephone user part formats and codes A Corrigendum was indicated in 03/1993.
Telephone user part signalling procedures
Signalling performance in the telephone application
ISDN user part supplementary services
Direct-dialling-In (DDI)
Calling line identification presentation (CLIP)
Calling line identification restriction (CLIR)
Connected line identification presentation (COLP)
Connected line identification restriction (COLR)
Malicious call identification (MCID)
Stage 3 description for number identification supplementary services using Signalling System No. 7 : Sub-addressing (SUB) Published with ITU-T Q.731.1.
Call diversion services Call diversion Recommendation groups four services the stage 3 descriptions of which are similar: Q.732.2 - Call Forwarding Busy (CFB) Q.732.3 - Call Forwarding No Reply (CFNR) Q.732.4 - Call Forwarding Unconditional (CFU) Q.732.5 - Call Deflection (CD).
Explicit Call Transfer
Call waiting (CW)
Stage 3 description for call completion supplementary services using Signalling System No. 7 : Call hold (HOLD) Published with ITU-T Q.733.4.
Completion of calls to busy subscriber (CCBS)
Stage 3 description for call completion supplementary services using Signalling System No. 7 : Terminal portability (TP) Published with ITU-T Q.733.2.
Completion of calls on no reply
Stage 3 description for multiparty supplementary services using Signalling System No. 7 : Conference calling Published with ITU-T Q.734.2. Covering note, June 1999: Information note
Three-party service
Closed user group (CUG)
Multi-level precedence and preemption
Global Virtual Network Service (GVNS)
International Telecommunication Charge Card (ITCC)
Reverse charging (REV)
User-to-user signalling (UUS)
[Withdrawn] Signalling System No. 7 - Data user part This Recommendation was published under alias number X.61. It was discontinued because it was no longer used
Overview of Signalling System No. 7 management
Network element management information model for the Message Transfer Part (MTP)
Network element management information model for the Signalling Connection Control Part
Network element information model for MTP accounting
Network element information model for SCCP accounting and accounting verification
Monitoring and measurements for Signalling System No. 7 networks
Signalling System No. 7 management functions MRVT, SRVT and CVT and definition of the OMASE-user
Signalling System No. 7 management Application Service Element (ASE) definitions
Signalling System No. 7 protocol tests
MTP Protocol Tester
Transaction capabilities test responder
Guidebook to Operations, Maintenance and Administration Part (OMAP)
Signalling System No. 7 - ISDN User Part functional description
Signalling System No. 7 - ISDN User Part general functions of messages and signals
Signalling System No. 7 - ISDN User Part formats and codes
Signalling System No. 7 - ISDN User Part signalling procedures
Signalling system No. 7 - Application transport mechanism
Signalling system No. 7 - Application transport mechanism: Test suite structure and test purposes (TSS & TP)
Signalling system No. 7 - Application transport mechanism: Support of VPN applications with PSS1 information flows
Abstract test suite for the APM support of VPN applications
Signalling system No. 7 - Application transport mechanism: Support of the generic addressing and transport protocol
Signalling system No. 7 - Application transport mechanism: Bearer Independent Call Control (BICC)
Performance objectives in the integrated services digital network application
Application of the ISDN User Part of CCITT signalling system No. 7 for international ISDN interconnections
Signalling interface between an international switching centre and an ISDN satellite subnetwork
Signalling system No. 7 - ISDN user part enhancements for the support of number portability
Functional description of transaction capabilities
Transaction capabilities information element definitions
Transaction capabilities formats and encoding
Transaction capabilities procedures
Guidelines for using transaction capabilities
Signalling System No. 7 test specification - General description
MTP level 2 test specification
MTP level 3 test specification
TUP test specification
TTCN version of Recommendation Q.784
ISUP basic call test specification: Validation and compatibility for ISUP'92 and Q.767 protocols
ISUP basic call test specification: Abstract test suite for ISUP'92 basic call control procedures This Recommendation includes one diskette containing Annex D ISUP'92 ATS for basic call in graphical and in machine processable form.
ISUP '97 basic call control procedures - Test suite structure and test purposes (TSS & TP)
ISUP protocol test specification for supplementary services
ISUP’97 supplementary services - Test suite structure and test purposes (TSS & TP) This Recommendation includes one CD-ROM containing the ISUP'97 ATS for supplementary services in machine processable form and in graphical form.
SCCP test specification
Transaction Capabilities (TC) test specification
User-network-interface to user-network-interface compatibility test specifications for ISDN, non-ISDN and undetermined accesses interworking over international ISUP
[Withdrawn] Operations, Maintenance and Administration Part (OMAP) The content of this Recommendation is now covered by ITU-T Q.75x series
Lower layer protocol profiles for the Q and X interfaces
Upper layer protocol profiles for the Q and X interfaces
Security Transformations Application Service Element for Remote Operations Service Element (STASE-ROSE)
Specification of an electronic data interchange interactive agent
Specification of a security module for whole message protection
CORBA-based TMN services
CORBA-based TMN services: Extensions to support coarse-grained interfaces
CORBA-based TMN services: Extensions to support service-oriented interfaces
TMN PKI - Digital certificates and certificate revocation lists profiles
Stage 2 and Stage 3 description for the Q3 interface - Alarm Surveillance
CORBA-based TMN alarm surveillance service
Stage 1, stage 2 and stage 3 description for the Q3 interface - Performance management
CORBA-based TMN performance management service
Stage 2 and stage 3 functional specifications for traffic management
Management Conformance Statement Proformas
Common information
Integrated Services Digital Network (ISDN) basic and primary rate access
Integrated Services Digital Network (ISDN) supplementary services
Integrated Services Digital Network (ISDN) optional user facilities
Integrated Services Digital Network (ISDN) teleservices
Configuration management of V5 interface environments and associated customer profiles
Broadband switch management
Enhanced Broadband Switch
Specification of TMN applications at the Q3 interface: Call detail recording
Routing management model
Requirements and analysis for the common management functions of NMS-EMS interfaces
Fault and performance management of V5 interface environments and associated customer profiles
Access Management for V5
VB5.1 Management
VB5.2 Management
Broadband access coordination 5286
Asymmetric digital subscriber line (ADSL) - Network element management: CMIP model
ATM-PON requirements and managed entities for the network and network element views
[Withdrawn] ATM-PON requirements and managed entities for the network view Deleted on 2004-09-30, its content having been merged into 2004 version of ITU-T Rec. Q.834.1
A UML description for management interface requirements for broadband Passive Optical Networks
A CORBA interface specification for Broadband Passive Optical Networks based on UML interface requirements
Line and line circuit test management of ISDN and analogue customer accesses
SSF management information model
SDH-DLC functional requirements for the network and network element views
Use case descriptions and analysis for SDH-DLC network level management interface
Requirements and analysis for the management interface of Ethernet passive optical networks (EPON)
Requirements and Analysis for NMS-EMS Management Interface of Ethernet over Transport and Metro Ethernet Network (EoT/MEN)
Usage of cause and location in the Digital Subscriber Signalling System No. 1 and the Signalling System No. 7 ISDN User Part
Integrated services digital network (ISDN) and broadband integrated services digital network (B-ISDN) generic addressing and transport (GAT) protocol
ISDN user-network interface data link layer - General aspects This Recommendation is also included but not published in I series under alias number I.440
ISDN user-network interface - Data link layer specification This Recommendation is also included but not published in I series under alias number I.441.
Abstract test suite for LAPD conformance testing This Recommendation includes 5 diskettes containing postscript files of ATS for testing conformance of basic rate user side equipment to Rec. Q.921.
ISDN data link layer specification for frame mode bearer services
Specification of a synchronization and coordination function for the provision of the OSI connection-mode network service in an ISDN environment
ISDN user-network interface layer 3 - General aspects This Recommendation is also included but not published in I series under alias number I.450
ISDN user-network interface layer 3 specification for basic call control This Recommendation is also included but not published in I series under alias number I.451
[Withdrawn] PICS and abstract test suite for ISDN DSS1 layer 3 - Circuit mode, basic call control conformance testing
Digital subscriber signalling system No. 1 - Generic procedures for the control of ISDN supplementary services This Recommendation is also included but not published in I series under alias number I.452.
ISDN Digital Subscriber Signalling System No. 1 (DSS1) - Signalling specifications for frame mode switched and permanent virtual connection control and status monitoring
Abstract test suite - Signalling specification for frame mode basic call control conformance testing for permanent virtual connections (PVCs) This Recommendation includes one diskette containing Abstract test suites Section II corresponding to additional procedures for PVCs as per ITU-T Q.933 Annex A.
Typical DSS 1 service indicator codings for ISDN telecommunications services
ISDN user-network interface protocol for management - General aspects
ISDN user-network interface protocol profile for management
Supplementary services protocols, structure and general principles
Direct-dialling-in (DDI) Q.951 parts 1, 2 and 8 published together
Multiple subscriber number (MSN) Q.951 parts 1, 2 and 8 published together
Calling line identification presentation Q.951 parts 3-6 published together
Calling line identification restriction Q.951 parts 3-6 published together
Connected line identification presentation Q.951 parts 3-6 published together
Connected line identification restriction Q.951 parts 3-6 published together
Malicious Call Identification (MCID)
Sub-addressing (SUB) Q.951 parts 1, 2 and 8 published together
Stage 3 description for call offering supplementary services using DSS 1 - Diversion supplementary services
Stage 3 description for call offering supplementary services using DSS 1 - Explicit Call Transfer (ECT)
Call waiting
Call hold
Completion of Calls to Busy Subscribers (CCBS)
Terminal Portability (TP)
Stage 3 description for call completion supplementary services using DSS 1 : Call Completion on No Reply (CCNR) This Recommendation includes one diskette containing the SDL process diagrams of DSS1 CCNR in machine processable form and in graphical form.
Stage 3 description for multiparty supplementary services using DSS 1 : Conference calling Covering note, June 1999: Information note
Three-party (3PTY)
Closed user group
Multi-level precedence and preemption (MLPP)
Advice of charge
Reverse charging
User-to-User Signalling (UUS)
[Withdrawn] Structure of the Q.1000-Series Recommendations for public land mobile networks This Recommendation was deleted on 24/12/2003 since it has become obsolete, due to the evolution of the work on mobile networks
General aspects of public land mobile networks
[Withdrawn] Network functions This Recommendation was deleted on 24/12/2003 since it has become obsolete, due to the evolution of the work on mobile networks
[Withdrawn] Location registration procedures This Recommendation was deleted on 24/12/2003 since it has become obsolete, due to the evolution of the work on mobile networks
[Withdrawn] Location register restoration procedures This Recommendation was deleted on 24/12/2003 since it has become obsolete, due to the evolution of the work on mobile networks
[Withdrawn] Handover procedures This Recommendation was deleted on 24/12/2003 since it has become obsolete, due to the evolution of the work on mobile networks
[Withdrawn] General signalling requirements on interworking between the ISDN or PSTN and the PLMN Formerly Q.70 (1984). This Recommendation was deleted on 24/12/2003 since it has become obsolete, due to the evolution of the work on mobile networks
[Withdrawn] Signalling requirements relating to routing of calls to mobile subscribers This Recommendation was deleted on 24/12/2003 since it has become obsolete, due to the evolution of the work on mobile networks
[Withdrawn] Mobile application Part This Recommendation was made for second generation of mobile systems. For this generation, three specifications have been developed by regional standards organizations. These implementations were complying with the philosophy of intentions of the Q.1000-Series of Recommendations, but they were modified and enhanced to include new functions and to handle regional network dependant features. These regional specifications supersede ITU-T Q.1051 (1988)
[Withdrawn] General aspects and principles relating to digital PLMN access signalling reference points This Recommendation was deleted on 24/12/2003 since it has become obsolete, due to the evolution of the work on mobile networks
[Withdrawn] Digital PLMN access signalling reference configurations This Recommendation was deleted on 24/12/2003 since it has become obsolete, due to the evolution of the work on mobile networks
[Withdrawn] Digital PLMN channel structures and access capabilities at the radio interface (Um reference point) This Recommendation was deleted on 24/12/2003 since it has become obsolete, due to the evolution of the work on mobile networks
Structure of the Recommendations on the INMARSAT mobile satellite systems
General requirements for the interworking of the terrestrial telephone network and INMARSAT Standard A system
Interworking between Signalling System R2 and INMARSAT Standard A system
Interworking between Signalling System No. 5 and INMARSAT Standard A system
Interfaces between the INMARSAT Standard B system and the international public switched telephone network/ISDN
Procedures for interworking between INMARSAT Standard-B system and the international public switched telephone network/ISDN
Interfaces for interworking between the INMARSAT aeronautical mobile-satellite system and the international public switched telephone network/ISDN
Procedures for interworking between INMARSAT aeronautical mobile satellite system and the international public switched telephone network/ISDN
General series Intelligent Network Recommendation structure
Principles of intelligent network architecture This Recommendation is published with the double number Q.1201 and I.312. For more details see I.312
Intelligent network - Service plane architecture This Recommendation is published with the double number Q.1202 and I.328. For more details see I.328
Intelligent network - Global functional plane architecture This Recommendation is published with the double number Q.1203 and I.329. For more details see I.329
Intelligent network distributed functional plane architecture
Intelligent network physical plane architecture
General aspects of the Intelligent Network Application protocol
Q.1210-series intelligent network Recommendation structure
Introduction to intelligent network capability set 1
Global functional plane for intelligent network CS-1
Distributed functional plane for intelligent network CS-1
Physical plane for intelligent network CS-1
Interface Recommendation for intelligent network CS-1
Intelligent network user's guide for Capability Set 1
Q.1220-series Intelligent Network Capability Set 2 Recommendation structure
Introduction to Intelligent Network Capability Set 2
Service plane for Intelligent Network Capability Set 2
Global functional plane for intelligent network Capability Set 2
Distributed functional plane for intelligent network Capability Set 2 This Recommendation is published in three fascicles.
Physical plane for Intelligent Network Capability Set 2
Interface Recommendation for intelligent network Capability Set 2 This Recommendation includes 3 diskettes containing Q.1228 SDL diagrams in SDT source format and in PDF format.
Intelligent Network user's guide for Capability Set 2 This Recommendation is published in 5 fascicles.
Introduction to Intelligent Network Capability Set 3
Intelligent Network Capability Set 3 - Management Information Model Requirements and Methodology
Extensions to Intelligent Network Capability Set 3 in support of B-ISDN
Common aspects
Interface Recommendation for intelligent network capability set 3 : SCF-SSF interface
Interface Recommendation for intelligent network capability set 3 : SCF-SRF interface
Interface Recommendation for intelligent network capability set 3 : SCF-SDF interface
Interface Recommendation for intelligent network capability set 3 : SDF-SDF interface
Interface Recommendation for intelligent network capability set 3: SCF-SCF interface
Interface Recommendation for intelligent network capability set 3 : SCF-CUSF interface
Introduction to Intelligent Network Capability Set 4
Distributed functional plane for Intelligent Network Capability Set 4
Interface Recommendation for Intelligent Network Capability Set 4: Common aspects
Interface recommendation for Intelligent Network Capability Set 4: SCF-SSF Interface
Interface recommendation for Intelligent Network Capability Set 4 : Interface Recommendation for Intelligent Network Capability Set 4: SCF-SRF interface
Interface Recommendation for Intelligent Network Capability Set 4: SCF-SDF interface
Interface recommendation for Intelligent Network Capability Set 4 : Interface Recommendation for Intelligent Network Capability Set 4: SDF-SDF interface
Interface Recommendation for Intelligent Network Capability Set 4: SCF-SCF interface
Interface Recommendation for Intelligent Network capability set 4: SCF-CUSF Interface
Glossary of terms used in the definition of intelligent networks
Telecommunication applications for switches and computers (TASC) - General overview
Telecommunication applications for switches and computers (TASC) - TASC Architecture
Telecommunication applications for switches and computers (TASC) - TASC functional services
Telecommunication applications for switches and computers (TASC) - TASC Management: Architecture, methodology and requirements
Architecture framework for the development of signalling and OA&M protocols using OSI concepts
Requirements on underlying networks and signalling protocols to support UPT
UPT security requirements for Service Set 1
UPT stage 2 for Service Set 1 on IN CS-1 - Procedures for universal personal telecommunication: Functional modelling and information flows
UPT stage 2 for Service Set 1 on IN CS-2 - Procedures for universal personal telecommunication: Functional modelling and information flows
Application of Intelligent Network Application Protocols (INAP) CS-1 for UPT service set 1
Signalling System No. 7 - Interaction between ISUP and INAP
Signalling system No. 7 - Interaction between ISDN user part ISUP '97 and INAP CS-1: Test suite structure and test purposes (TSS & TP)
Signalling system No. 7 - Interaction between N-ISDN and INAP CS-2
Framework for IMT-2000 networks
Long-term vision of network aspects for systems beyond IMT-2000
Service and network capabilities framework of network aspects for systems beyond IMT-2000
Functional network architecture for IMT-Advanced
Mobility management requirements for NGN
Generic framework of mobility management for next generation networks
Framework of location management for NGN
Framework of handover control for NGN
Network functional model for IMT-2000
Information flows for IMT-2000 capability set 1
Radio-technology independent requirements for IMT-2000 layer 2 radio interface
IMT-2000 references to release 1999 of GSM evolved UMTS core network with UTRAN access network
IMT-2000 references to release 4 of GSM evolved UMTS core network with UTRAN access network
IMT-2000 references to release 5 of GSM evolved UMTS core network
IMT-2000 References to Release 6 of GSM evolved UMTS Core Network
IMT 2000 references to Release 7 of GSM evolved UMTS core network
IMT-2000 references to ANSI-41 evolved core network with cdma2000 access network
IMT-2000 references (approved as of 11 July 2002) to ANSI-41 evolved core network with cdma2000 access network
IMT-2000 references (approved as of 30 June 2003) to ANSI-41 evolved core network with cdma2000 access network
IMT-2000 references (approved as of 30 June 2004) to ANSI-41 evolved core network with cdma2000 access network
IMT 2000 references (approved as of 31 December 2005) to ANSI-41 evolved core network with cdma2000 access network
IMT-2000 References (approved as of 31 December 2006) to ANSI-41 evolved Core Network with cdma2000 Access Network
IMT 2000 References (approved as of 30 June 2008) to ANSI-41 evolved Core Network with cdma2000 Access Network
Internetwork signalling requirements for IMT-2000 capability set 1
Principles and requirements for convergence of fixed and existing IMT-2000 systems
Fixed-mobile convergence general requirements
FMC service using legacy PSTN or ISDN as the fixed access network for mobile network users
Bearer Independent Call Control protocol
Bearer Independent Call Control protocol (Capability Set 2): Functional description
Bearer Independent Call Control protocol (Capability Set 2) and Signalling System No.7 ISDN User Part: General functions of messages and parameters
Bearer Independent Call Control protocol (Capability Set 2) and Signalling System No.7 ISDN User Part: Formats and codes
Bearer Independent Call Control protocol (Capability Set 2): Basic call procedures
Bearer Independent Call Control protocol (Capability Set 2): Exceptions to the application transport mechanism in the context of BICC
Bearer Independent Call Control protocol (Capability Set 2): Generic signalling procedures for the support of the ISDN user part supplementary services and for bearer redirection
Interworking between Signalling System No. 7 ISDN user part and the Bearer Independent Call Control protocol
Interworking between selected signalling systems (PSTN access, DSS1, C5, R1, R2, TUP) and the Bearer Independent Call Control protocol
Interworking between H.323 and the Bearer Independent Call Control protocol
Interworking between Digital Subscriber Signalling System No. 2 and the Bearer Independent Call Control protocol
Interworking between Session Initiation Protocol (SIP) and Bearer Independent Call Control protocol or ISDN User Part
Interaction between the Intelligent Network Application Protocol Capability Set 2 and the Bearer Independent Call Control protocol
Interaction between the Intelligent Network application CS-4 protocol and the Bearer Independent Call Control protocol
BICC access network protocol
Bearer independent call bearer control protocol
BICC IP Bearer control protocol
The Narrowband Signalling Syntax (NSS) - Syntax definition
BICC Bearer Control Tunnelling Protocol
Broadband integrated services digital network overview - Signalling capability set 1, release 1
B-ISDN signalling ATM adaptation layer (SAAL) - Overview description
B-ISDN ATM adaptation layer - Service specific connection oriented protocol (SSCOP)
B-ISDN ATM adaptation layer - Service specific connection oriented protocol in a multilink and connectionless environment (SSCOPMCE)
B-ISDN ATM adaptation layer - Convergence function for SSCOP above the frame relay core service
B-ISDN meta-signalling protocol
B-ISDN signalling ATM adaptation layer - Service specific coordination function for support of signalling at the user-network interface (SSCF at UNI)
B-ISDN ATM adaptation layer - Service specific coordination function for signalling at the network node interface (SSCF at NNI)
B-ISDN signalling ATM adaptation layer - Layer management for the SAAL at the network node interface
Generic signalling transport service
Signalling transport converter on MTP3 and MTP3b
Signalling transport converter on SSCOP and SSCOPMCE
Signalling transport converter on SCTP
Message transfer part level 3 functions and messages using the services of ITU-T Recommendation Q.2140
Transport-Independent Signalling Connection Control Part (TI-SCCP)
Usage of cause and location in B-ISDN user part and DSS2
AAL type 2 signalling protocol (Capability Set 1)
AAL type 2 signalling protocol - Capability Set 2
AAL type 2 signalling protocol - Capability Set 3
Interworking between AAL type 2 signalling protocol Capability Set 2 and IP connection control signalling protocol Capability Set 1
Interworking between AAL type 2 signalling protocol Capability Set 2 and IP connection control signalling protocol Capability Set 1
Interworking between signalling system No. 7 broadband ISDN User Part (B-ISUP) and digital subscriber signalling system No. 2 (DSS2)
Interworking between signalling system No. 7 broadband ISDN user part (B-ISUP) and narrow-band ISDN user part (N-ISUP)
[Withdrawn] B-ISDN user part - Overview of the B-ISDN Network Node Interface Signalling Capability Set 2, Step 1 The content of this Rec. is now covered by ITU-T Recs. Q.2761, Q.2762, Q.2763 and Q.2764 approved in 12/1999
B-ISDN user part - Network node interface specification for point-to-multipoint call/connection control
[Withdrawn] B-ISDN User Part - Support of additional traffic parameters for Sustainable Cell Rate and Quality of Service The contents of this Rec. is now covered by ITU-T Recs. Q.2761, Q.2762, Q.2763 and Q.2764 approved in 12/1999
[Withdrawn] Extensions to the B-ISDN User Part - Support of ATM transfer capability in the broadband bearer capability parameter The contents of this Rec. is now covered by ITU-T Recs. Q.2761, Q.2762, Q.2763 and Q.2764 approved in 12/1999
[Withdrawn] Extensions to the B-ISDN User Part - Signalling capabilities to support traffic parameters for the Available Bit Rate (ABR) ATM transfer capability The contents of this Rec. is now covered by ITU-T Recs. Q.2761, Q.2762, Q.2763 and Q.2764 approved in 12/1999
[Withdrawn] Extensions to the B-ISDN User Part - Signalling capabilities to support traffic parameters for the ATM Block Transfer (ABT) ATM transfer capability The contents of this Rec. is now covered by ITU-T Recs. Q.2761, Q.2762, Q.2763 and Q.2764 approved in 12/1999
[Withdrawn] B-ISDN User Part - Support of cell delay variation tolerance indication The contents of this Rec. is now covered by ITU-T Recs. Q.2761, Q.2762, Q.2763 and Q.2764 approved in 12/1999
[Withdrawn] Extensions to the Signalling System No. 7 B-ISDN User Part - Signalling capabilities to support the indication of the Statistical Bit Rate configuration 2 (SBR 2) and 3 (SBR 3) ATM transfer capabilities The contents of this Rec. is now covered by ITU-T Recs. Q.2761, Q.2762, Q.2763 and Q.2764 approved in 12/1999
B-ISDN user part - Look-ahead without state change for the network node interface
[Withdrawn] B-ISDN User Part - Support of negotiation during connection setup The contents of this Rec. is now covered by ITU-T Recs. Q.2761, Q.2762, Q.2763 and Q.2764 approved in 12/1999
[Withdrawn] B ISDN User Part - Modification procedures The contents of this Rec. is now covered by ITU-T Recs. Q.2761, Q.2762, Q.2763 and Q.2764 approved in 12/1999
[Withdrawn] Extensions to the B-ISDN User Part - Modification procedures for sustainable cell rate parameters The contents of this Rec. is now covered by ITU-T Recs. Q.2761, Q.2762, Q.2763 and Q.2764 approved in 12/1999
[Withdrawn] Extensions to the Signalling System No. 7 B-ISDN User Part - Modification procedures with negotiation The contents of this Rec. is now covered by ITU-T Recs. Q.2761, Q.2762, Q.2763 and Q.2764 approved in 12/1999
[Withdrawn] B-ISDN user part - ATM end system address The contents of this Rec. is now covered by ITU-T Recs. Q.2761, Q.2762, Q.2763 and Q.2764 approved in 12/1999
B-ISDN user part - Call priority
B-ISDN user part - Network generated session identifier
Extensions to the B-ISDN user part - Application generated identifiers
[Withdrawn] B-ISDN user part - Support of frame relay The contents of this Rec. is now covered by ITU-T Recs. Q.2761, Q.2762, Q.2763 and Q.2764 approved in 12/1999
Signalling system No. 7 B-ISDN user part (B-ISUP) - Supplementary services
Closed User Group (CUG)
Extension of Q.751.1 for SAAL signalling links
Functional description of the B-ISDN user part (B-ISUP) of signalling system No. 7
General functions of messages and signals of the B-ISDN User Part (B-ISUP) of Signalling System No. 7
Signalling System No. 7 B-ISDN User Part (B-ISUP) - Formats and codes
Signalling System No. 7 B-ISDN User Part (B-ISUP) - Basic call procedures
Signalling System No. 7 B-ISDN User Part (B-ISUP) - Application transport mechanism (APM)
Switched virtual path capability
Soft PVC capability
Support of number portability information across B-ISUP
Broadband integrated services digital network (B-ISDN) - Digital Subscriber Signalling System No. 2 (DSS 2): Call/connection control for the support of ATM-MPLS network interworking
Digital Subscriber Signalling System No. 2 - User-Network Interface (UNI) layer 3 specification for basic call/connection control Modified by ITU-T Q.2971 (10/1995).
Broadband integrated services digital network (B-ISDN) - Digital subscriber signalling system No. 2 (DSS2) - User-network interface (UNI) layer 3 specification for basic call/connection control: Protocol implementation conformance statement (PICS) proforma ITU-T Q.2931 B was previously numbered as Q.2931 bis during the approval process
Broadband integrated services digital network (B-ISDN) - Digital subscriber signalling system No. 2 (DSS2) - User-network interface (UNI) layer 3 specification for basic call/connection control: Test suite structure and test purposes (TSS & TP) for the user ITU-T Q.2931 C was previously numbered as Q.2931 ter during the approval process
Broadband integrated services digital network (B-ISDN) - Digital subscriber signalling system No. 2 (DSS2) - User-network interface (UNI) layer 3 specification for basic call/connection control: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma for the user ITU-T Q.2931 D was previously numbered as Q.2931 quater during the approval process
Broadband integrated services digital network (B-ISDN) - Digital subscriber signalling system No. 2 (DSS2) - User-network interface (UNI) layer 3 specification for basic call/connection control: Test suite structure and test purposes (TSS & TP) for the network ITU-T Q.2931 E was previously numbered as Q.2931 quinquies during the approval process
Broadband integrated services digital network (B-ISDN) - Digital subscriber signalling system No. 2 (DSS2) - User-network interface (UNI) layer 3 specification for basic call/connection control: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma for the network ITU-T Q.2931 F was previously numbered as Q.2931 sexies during the approval process
Core functions
Digital subscriber signalling system No. 2 - Signalling specification for frame relay service
Digital subscriber signalling system No. 2 - Switched virtual path capability
Digital Subscriber Signalling System No. 2 - Application of DSS2 service-related information elements by equipment supporting B-ISDN services
Digital Subscriber Signalling System No. 2 - Generic identifier transport
Digital Subscriber Signalling System No. 2 - Generic identifier transport extensions
Digital Subscriber Signalling System No. 2 - Generic identifier transport extension for support of bearer independent call control
Stage 3 description for number identification supplementary services using B-ISDN Digital Subscriber Signalling System No. 2 (DSS2 ) - Basic Call
Support of ATM end system addressing format by Number identification supplementary services
Closed User Group (CUG)
Stage 3 description for additional information transfer supplementary services using B-ISDN digital subscriber signalling system No. 2 (DSS2) - Basic call : User-to-user signalling (UUS) Modified by ITU-T Q.2971 (10/1995).
Digital subscriber signalling system No. 2 - Call priority
Digital subscriber signalling system No. 2 (DSS 2) - Additional traffic parameters: Protocol implementation conformance statement (PICS) proforma ITU-T Q.2961 B was previously numbered as Q.2961 bis during the approval process
Digital subscriber signalling system No. 2 (DSS 2) - Additional traffic parameters: Test Suite Structure and Test Purposes (TSS & TP) for the user ITU-T Q.2961 C was previously numbered as Q.2961 ter during the approval process
Digital subscriber signalling system No. 2 (DSS 2) - Additional traffic parameters: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma for the user ITU-T Q.2961 D was previously numbered as Q.2961 quater during the approval process
Digital subscriber signalling system No. 2 (DSS 2) - Additional traffic parameters: Test Suite Structure and Test Purposes (TSS & TP) for the network ITU-T Q.2961 E was previously numbered as Q.2961 quinquies during the approval process
Digital subscriber signalling system No. 2 (DSS 2) - Additional traffic parameters: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma for the Network ITU-T Q.2961 F was previously numbered as Q.2961 sexies during the approval process
Additional signalling capabilities to support traffic parameters for the tagging option and the sustainable cell rate parameter set
Digital subscriber signalling system No. 2 - Additional traffic parameters : Support of ATM Transfer capability in the broadband bearer capability information element
Signalling capabilities to support traffic parameters for the available bit rate (ABR) ATM transfer capability
Signalling capabilities to support traffic parameters for the ATM Block Transfer (ABT) ATM transfer capability
Additional traffic parameters for cell delay variation tolerance indication
Additional signalling procedures for the support of the SBR2 and SBR3 ATM transfer capabilities
Digital subscriber signalling system No. 2 - Connection characteristics negotiation during call/connection establishment phase
Digital subscriber signalling system No. 2 - Connection characteristics negotiation during call/connection establishment phase: Protocol Implementation Conformance Statement (PICS) proforma ITU-T Q.2962 B was previously numbered as Q.2962 bis during the approval process
Digital subscriber signalling system No. 2 - Connection characteristics negotiation during call/connection establishment phase: Test suite structure and test purposes (TSS & TP) for the user ITU-T Q.2962 C was previously numbered as Q.2962 ter during the approval process
Digital subscriber signalling system No. 2 - Connection characteristics negotiation during call/connection establishment phase: Abstract test suite (ATS) and partial protocol implementation extra information for testing (PIXIT) proforma for the user ITU-T Q.2962 D was previously numbered as Q.2962 quater during the approval process
Digital subscriber signalling system No. 2 - Connection characteristics negotiation during call/connection establishment phase: Test suite structure and test purposes (TSS & TP) for the network ITU-T Q.2962 E was previously numbered as Q.2962 quinquies during the approval process
Digital subscriber signalling system No. 2 - Connection characteristics negotiation during call/connection establishment phase: Abstract test suite (ATS) and partial protocol Implementation extra information for testing (PIXIT) proforma for the network ITU-T Q.2962 F was previously numbered as Q.2962 sexies during the approval process
Peak cell rate modification by the connection owner
Digital subscriber signalling system No. 2 - Connection modification : Peak cell rate modification by the connection owner: Protocol implementation conformance statement (PICS) proforma ITU-T Q.2963.1 B was previously numbered as Q.2963.1 bis during the approval process
Digital subscriber signalling system No. 2 - Connection modification : Peak cell rate modification by the connection owner: Test suite structure and test purposes (TSS & TP) for the user ITU-T Q.2963.1 C was previously numbered as Q.2963.1 ter during the approval process
Digital subscriber signalling system No. 2 - Connection modification : Peak cell rate modification by the connection owner: Abstract test suite (ATS) and partial protocol implementation extra information for testing (PIXIT) proforma for the user ITU-T Q.2963.1 D was previously numbered as Q.2963.1 quater during the approval process
Digital subscriber signalling system No. 2 - Connection modification : Peak cell rate modification by the connection owner: Test suite structure and test purposes (TSS & TP) for the network ITU-T Q.2963.1 E was previously numbered as Q.2963.1 quinquies during the approval process
Digital subscriber signalling system No. 2 - Connection modification : Peak cell rate modification by the connection owner: Abstract test suite (ATS) and partial protocol implementation extra information for testing (PIXIT) proforma for the network ITU-T Q.2963.1 F was previously numbered as Q.2963.1 sexies during the approval process
Modification procedures for sustainable cell rate parameters
ATM traffic descriptor modification with negotiation by the connection owner
Digital subscriber signalling system No. 2 - Basic look-ahead
Digital subscriber signalling system No. 2 - Support of Quality of Service classes
Digital subscriber signalling system No. 2 - Support of Quality of Service classes: Protocol Implementation Conformance Statement (PICS) proforma ITU-T Q.2965.1B was previously numbered as Q.2965.1 bis during the approval process
Digital subscriber signalling system No. 2 - Signalling of individual Quality of Service parameters
Digital subscriber signalling system No. 2 - Signalling of individual Quality of Service parameters: Protocol Implementation Conformance Statement (PICS) proforma ITU-T Q.2965.2B was previously numbered as Q.2965.1 bis during the approval process
Digital Subscriber Signalling System No. 2 (DSS2) - User-network interface layer 3 specification for point-to-multipoint call/connection control Modifies ITU-T Q.2931, Q.2951 and Q.2957.
Digital Subscriber signalling system No. 2 - User-network interface layer 3 specification for point-to-multipoint call/connection control: Test Suite Structure and Test Purposes (TSS & TP) for the user ITU-T Q.2971 C was previously numbered as Q.2971 ter during the approval process
Digital subscriber signalling system No. 2 - User-network interface layer 3 specification for point-to-multipoint call/connection control: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma for the user ITU-T Q.2971 D was previously numbered as Q.2971 quater during the approval process
Digital subscriber signalling system No. 2 - User-network interface layer 3 specification for point-to-multipoint call/connection control: Test Suite Structure and Test Purposes (TSS & TP) for the network ITU-T Q.2971 E was previously numbered as Q.2971 quinquies during the approval process
Digital Subscriber Signalling System No. 2 - User-network interface layer 3 specification for point-to-multipoint call/connection control: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma for the network ITU-T Q.2971 F was previously numbered as Q.2971 sexies during the approval process
Broadband Integrated Services Digital Network (B-ISDN) and Broadband Private Integrated Services Network (B-PISN) call control protocol
Broadband integrated services digital network (B-ISDN) - Digital Subscriber Signalling System No. 2 (DSS2) - Q.2931-based separated call control protocol
Broadband integrated services digital network (B-ISDN) - Digital subscriber signalling No. 2 (DSS2) - Bearer control protocol
Broadband integrated services digital network (B-ISDN) and broadband private integrated services network (B-PISN) - Pre-negotiation
TSS & TP
ICS & IXIT and ATS
Signalling architecture for the NGN service control plane
Use of virtual trunks for ATM/MPLS client/server control plane interworking
ATM and frame relay/MPLS control plane interworking: Client-server
EAP-based security signalling protocol architecture for network attachments
Authentication protocols based on EAP-AKA for interworking among 3GPP, WiMax, and WLAN in NGN
Requirements and protocol at the S-TC1 interface between service control entity and the transport location management physical entity
Architectural framework for the Q.33xx series of Recommendations
Resource control protocol - Protocol at the Rs interface
Resource control protocol - Protocol at the Rp interface
Protocol at the interface between a Policy Decision Physical Entity (PD-PE) and a Policy Enforcement Physical Entity (PE-PE) (Rw interface): Overview
Protocol at the interface between a Policy Decision Physical Entity (PD-PE) and a Policy Enforcement Physical Entity (PE-PE): COPS Alternative
Protocol at the interface between a Policy Decision Physical Entity (PD-PE) and a Policy Enforcement Physical Entity (PE-PE) (Rw interface): H.248 Alternative
Protocol at the interface between the policy decision physical entity (PD-PE) and the policy enforcement physical entity (PE-PE) (Rw interface): Diameter
Resource control protocol no. 4 (rcp4). Protocol at the interface between a transport resource control physical entity (TRC-PE) and a transport physical entity (T-PE) (Rc interface): COPS alternative
Resource control protocol no. 4 SNMP Profile. Protocol at the Rc interface between a transport resource control physical entity (TRC-PE) and a transport physical entity (T-PE) (Rc interface)
Resource control protocol - Protocol at the Rt interface
NGN NNI signalling profile
NGN UNI signalling profile (Protocol set 1)
Methods of testing and model network architecture for NGN technical means testing as applied to public telecommunication networks
Distribution of tests and services for NGN technical means testing in the model and operator networks
Parameters to be monitored in the process of operation when implementing NGN technical means in public telecommunication networks
Formalized presentation of testing results
[Withdrawn] Characteristics of speech interpolation systems affecting signalling
[Withdrawn] Information received on national voice-frequency signalling systems
Definition of relative levels, transmission loss and attenuation/frequency distortion for digital exchanges with complex impedances at Z interfaces
Impedance strategy for telephone instruments and digital local exchanges in the British Telecom Network
Signalling System No. 7 testing and planning tools
[Withdrawn] Intelligent network user's guide: Supplement for IN CS-1
[Withdrawn] Number portability - Scope and capability set 1 architecture
Number portability - Capability set 1 requirements for service provider portability (All call query and Onward routing)
Number portability - Capability set 2 requirements for service provider portabilty (Query on release and Dropback)
Technical report TRQ.2000: Roadmap for the TRQ.2xxx-series technical reports
Technical report TRQ.2001: General aspects for the development of unified signalling requirements
Technical report TRQ.2400: Transport control signalling requirements - Signalling requirements for AAL Type 2 link control capability set 1
Technical Report TRQ.2000: Roadmap for the TRQ.2xxx-series Technical Reports
Technical Report TRQ.2002: Information Flow Elements
Technical Report TRQ.2010: B-ISDN signalling interworking requirements
Technical Report TRQ.2100: Coordinated call control and bearer control signalling requirements - Root-party coordinated call and bearer control
Technical Report TRQ.2110: Coordinated call control and bearer control signalling requirements - Leaf-party coordinated call and bearer control
Technical Report TRQ.2120: Coordinated call control and bearer control signalling requirements - Third-party coordinated call and bearer control
Technical Report TRQ.2130: Coordinated call control and bearer control signalling requirements for leaf initiated join service
Technical Report TRQ.2140
Technical Report TRQ.2200
Technical Report TRQ.2230
Technical Report TRQ.2300: Bearer control signalling requirements - Root-party bearer control
Technical Report TRQ.2310: Bearer control signalling requirements - Leaf-party bearer control
Technical Report TRQ.2320
Technical Report TRQ.3000: Operation of the bearer independant call control (BICC) protocol with digital subscriber signalling system No. 2 (DSS2)
Supplement to ITU-T Q.1901 Recommendation - Technical Report TRQ.3010: Operation of the bearer independant call control (BICC) protocol with AAL type 2 signalling protocol (CS-1)
Technical Report TRQ.3020: Operation of the bearer independant call control (BICC) protocol with broadband integrated services digital network user part (B-ISUP) for AAL Type 1 adaptation
Supplement to ITU-T Q.2900 series Recommendations: Broadband integrated services digital network (B-ISDN) -Digital subscriber signalling system No. 2 (DSS2) - User-network interface layer 3 - Overview of B-ISDN DSS2 signalling capabilities
Broadband integrated services digital network (B-ISDN) – Digital subscriber signalling system No. 2 (DSS2) and signalling system No. 7 (B-ISUP) – Support of services over IP-based networks
Technical Report - Overview of Signalling and Protocol Framework for an Emerging Environment (SPFEE)
Technical Report: Signalling and protocol framework for an emerging environment (SPFEE) – Specifications for service access
Service Modelling: Evolution to the use of object oriented techniques
Supplement to ITU-T Recommendation Q.1701 - Roadmap to IMT-2000 Recommendations, Standards and Technical Specifications
Technical report TRQ.2141.0: Signalling requirements for the support of narrowband services over broadband transport technologies - Capability set 2 (CS-2)
Technical Report TRQ.2141.1: Signalling requirements for the support of narrow-band services via broadband transport technologies - CS-2 signalling flows
Technical Report TRQ.2401: Transport control signalling requirements - Signalling requirements for AAL type 2 link control capability set 2
Technical report TRQ.2410: Signalling requirements capability set 1 for support of IP bearer control in BICC networks
Technical Report TRQ.2500: Signalling Requirements for the support of the call bearer control interface (CS-1)
Technical report TRQ.3030: Operation of the bearer independent call control (BICC) protocol (CS-2) with IP bearer control protocol (IPBCP)
DSS1 and DSS2 Messages and information element identifiers
Technical Report TRQ.2600: BICC signalling transport requirements – Capability set 1
Technical Report TRQ.2700: Requirements for signalling in access networks that support BICC
Technical Report: Reference document on API/object interface between network control and application layer
Technical Report TRQ.2003: Roadmap to the BICC protocol Recommendations, BICC interworking Recommendations, and BICC requirement supplements
Technical Report TRQ.2402: Transport control signalling requirements - Signalling requiremnts for AAL type 2 Link control Capability Set 3
Technical Report TRQ.2415: Transport control signalling requirements - Signalling requirements for IP connection control in radio access networks Capability Set 1
Technical Report TRQ.2800: Transport control signalling requirements - Signalling requirements for AAL type 2 to IP interworking Capability Set 1
Technical Report TRQ.2815: Requirements for interworking BICC/ISUP network with originating/destination networks based on Session Initiation Protocol and Session Description Protocol
Technical Report TRQ.2830: ATM-MPLS network interworking signalling requirements
Emergency services for IMT-2000 networks - Requirements for harmonization and convergence
Guideline document for specifying API/object interface between network control and application layer
Technical Report TRQ.2840: Signalling requirements to support IP telephony
Technical Report TRQ.2145: Requirements for a Narrowband Signalling Syntax (NSS)
Signalling requirements for IP-QoS
NNI mobility management requirements for systems beyond IMT-2000
Signalling requirements to support the International Emergency Preference Scheme (IEPS)
Signalling requirements at the interface between SUP-FE and S-CSC-FE
Signalling requirements at the interface between AS-FE and S-CSC-FE
Organisation of NGN Service User Data
Signalling requirements to support the emergency telecommunications service (ETS) in IP networks
Organization of transport user data
Signalling flows and parameter mapping for resource control